Study of the block/grout interface in concrete and clay block masonry structures

  • Orieta Izquierdo Universidade Federal do Tocantins (UFT)
  • Márcio Roberto Silva Corrêa Escola de Engenharia de São Carlos da Universidade de São Paulo (USP)
  • Indara Soto Universidade Estadual de Santa Cruz (UESC)

Abstract

This work aims to study the behavior of the block/grout interface for concrete and clay block masonry. This was achieved by push-out and pull-out experimental tests including reinforcement rebars in the latter ones. The experimental results showed that there is a good bond between the concrete blocks internal faces and the grout, enough to prevent infill-slippage, and that the whole tensile strength of the usual reinforcement rebars is achieved provided they are properly anchored. Nevertheless, for clay blocks there is a low bond between the clay blocks internal faces and the grout, allowing the infill-slippage before the reinforcement bars reach their yield stress.

Author Biography

Orieta Izquierdo, Universidade Federal do Tocantins (UFT)
Possui graduação em Engenharia Civil pelo Instituto Superior Politécnico José Antonio Echeverria (2008) (Cuba). Obteve o título de mestre em 2011 e o título de doutor em 2015, ambos na área de Estruturas pela Escola de Engenharia de São Carlos-USP. Atualmente é professora de Engenharia Civil da Universidade Federal de Tocantins. Tem experiência na área de Engenharia Civil, com ênfase em Estruturas de Concreto e Alvenaria, atuando principalmente nos seguintes temas: resíduos para uso em concretos, tecnologia do concreto, alvenaria estrutural e modelagem numérica.
Published
2017-07-27
Section
Artigos